Free energy is quite a simple thing. Free energy machines have existed for centuries. A free energy machine simply extracts energy from the surrounding medium and puts it to some practical use. Typical free energy devices are sail boats, water wheels, windmills and so on. The idea is to tap the energy of the medium of moving air or water in these cases. But, there are other mediums from which energy can also be extracted.
In the 20th century, free energy machines became more sophisticated. Here, I intend to discuss the little known more sophisticated free energy machines.
In our atmosphere at Standard Temperature and Pressure (STP), the molecules of the air have an average velocity of the speed of sound. The velocity of these molecules is totally random with zero net velocity. So, there is no 767 MPH wind. These random air molecule velocities do however possess considerable kinetic energy which manifest as air temperature and pressure. There was a businessman who developed a way of extracting this energy content of air to produce electricity.
Dennis Lee had a heat pump factory in the State of Washington. When President Carter passed an energy efficiency tax credit law, Dennis Lee asked his engineers to develop a more efficient heat pump so his company could qualify for the tax credit. The typical heat pumps of the time had a Coefficient of Performance (COP) of about 4.
A COP of 4 meant that the heat pump could pump 4 times as much heat energy as the electrical energy it consumed to operate the pump. Dennis Lee’s engineers eventually developed a heat pump that was tested in independent laboratories with a COP of over 12! With that high of a COP, Dennis Lee asked his engineers if it would be possible to take the heat pump output and run a heat engine that could power a generator and get more electricity out than was put in.
The engineers stated that the problem with that idea was the Carnot efficiency of heat engines; typically below 30%. One engineer however knew of a new type of heat engine developed by a Dr. Fischer that was theoretically 90% efficient. This engineer also knew how to contact Dr. Fischer.
Meanwhile, the Washington State electric utility company did not like the fact that Dennis Lee’s company was now selling such efficient heat pumps because they were losing money on all the homes that were using the more efficient heat pumps. They used their influence with the Washington State Attorney General’s office to bring a contrived lawsuit against Dennis Lee’s company.
Dennis Lee simply moved his operation to Ventura County in California. By now, the company had teamed up with Dr. Fischer and developed a Fischer cycle heat engine. Soon, they had perfected their machine to make electricity from the air. They rented an auditorium in Oxnard, California to demonstrate their device. About 200 attended the demonstration including mechanical and electrical engineers and members of the press.
On stage, the machine was displayed, complete with heat pump, Fischer cycle heat engine, generator, radiators and a panel with 100 light bulbs of 100 watts each. Skeptics from the audience were invited to go up on stage and examine the set up to show that there were no hidden wires and so on.
The machine was started with an extension cord from the theater’s electric power. Once the machine got up to operating RPMs the power was switched to the generator and the extension cord was disconnected and removed from the area. Now, the machine was powering itself.
Then Dennis Lee threw another switch and the panel of 100 100-watt light bulbs became brightly lit. That represented a load of 10 kilowatts. Dennis stated that this was not free energy because his machine was simply extracting the heat energy in the air to power the load and that conduction currents would soon cause the air in the auditorium to cool down. So, not only was his machine producing electricity but it was also an air conditioner!
The only reason we don’t have this technology on the market is because of suppression by the energy companies and their influence over our government.
Two days after Dennis Lee’s successful demonstration in Oxnard, his laboratory and business office was raided by the Ventura County Sheriffs. A semi-truck and trailer unit was backed up to his Laboratory and all the equipment inside was confiscated and loaded into the trailer. All the research papers and business contracts were likewise removed from his office and Dennis Lee was arrested. He was charged with failing to file some obscure document with the Ventura County Clerk’s office. Normally, this kind of problem would simply be solved by the County Clerk mailing a letter requesting said document. So, this was obviously, a bogus arrest. Dennis Lee was held for a year without trial. Then, after his company had folded, he was released and all charges dropped. Dennis Lee was never able to get his confiscated property back because the Sheriff’s office claimed that they were holding it for evidence!
Another experimenter, after hearing about the Dennis Lee concept, made a solar heating panel about 10 feet by 10 feet in area and connected the hot water output to a heat pump to step up the temperature further and was able to run a 350 HP steam engine from the small solar panel and heat pump combination.
If we accept that there is a finer medium than air surrounding us, which is known as Aether, and in which the particles have an average velocity of the speed of light, we might see even better possibilities for extracting energy from this medium.
The problem is in discovering something that interacts with Aether. While air can be compressed, Aether would pass right through every conceivable material. So, an Aether compressor or engine would be impossible to manufacture.
The solution is in electromagnetic phenomena. Electric and magnetic fields do interact with Aether. In fact, these fields might just be different kinds of Aether flows. The electric field might just be a linear Aether flow and the magnetic field, a vortex Aether flow circulating around a charged current flow. It is known that electric and magnetic fields, that are time variable, change into each other.
To those that still believe that in a vacuum, space is totally empty and there is no Aether, I would point out a property of space known to physicists as the “polarized vacuum”.
If two conducting plates are separated and placed in a perfect vacuum and a high voltage is placed across these plates, the vacuum becomes polarized. The higher the potential difference between the plates, the greater is the polarization of the vacuum between the plates. When the voltage is raised to a sufficiently high level, electron positron pair production starts occurring in the vacuum between the plates!
This well-known phenomenon demonstrates that this vacuum has something in it and is not empty space. Polarization only occurs in substances, however infinitesimal, with electric charges that are separated in space. And, the electron positron pairs didn’t just evolve out of nothing.
Many experimenters were fascinated with permanent magnets because they continually output a magnetic field without any input of energy. After much experimentation, a number of motors running off of permanent magnets were developed, the most famous being the Howard Johnson magnet motor, US patent # 4,151,431.
The 1980 spring issue of Science and Mechanics magazine ran a story on Howard Johnson’s magnetic motor and information can be seen here: http://www.rexresearch.com/johnson/1johnson.htm
Howard Johnson was not the only one to invent magnetic motors. Other inventors like Troy Reed and Perendev, and companies like Cyclone Magnetic Engines Inc., and Terawatt Research LLC., to mention a few, also have come up with various versions of magnetic motors. So, the concept is quite real. But, by various means, these inventions have been prevented from entering the market place.
Other methods of tapping the power of magnets also exist. One simple way is to pulse an electromagnet coil wrapped around or close to a permanent magnet. When the electromagnetic pulse reinforces the magnetic field of the permanent magnet field, the coil output power is greater than the input power. Bifilar coils are also useful in this experiment one being the input and the other being the output coil.
One free energy machine using this method is actually on the market in Canada! How they got past the suppressors, I don’t know. One version of the machine has 4 outputs, each putting out 100 amperes at 12 volts or a total of 4.8 Kilowatts. Also, there are more expensive versions of greater power. One needs other equipment to be used in conjunction with these machines, like storage batteries, inverters and charge controllers just like with solar systems.
The inventor is Richard Willis and the company is Magnacoaster. Some customers have complained about the long delivery time after placing an order. This is probably because these machines are hand built – not mass produced. But if you are curious, their youtube channel is: https://www.youtube.com/user/Magnacoastermotors/videos
Interesting things happen when two electromagnets are placed so that the same poles face each other and the coils are pulsed. Vectorily, the magnetic fields cancel. However, there is a stress placed in the space between the poles. This stress creates a pressure in the Aether and creates what is known as a scalar electromagnetic field, because pressure is a scalar quantity. Also of course, a repulsion force between the electromagnets takes place.
Edwin Grey developed a pulsed capacitive discharge motor which used this concept. High energy storage capacitors were charged up to 20,000 volts by rectifying the output from auto ignition coils. This 20,000 volt charge was then pulsed through rotary spark gaps through rotor and stator coils in his motor. The rotary spark gaps were synchronized with the rotor and stator coils so that the discharges took place when the coils were opposite each other, resulting in a tremendous repulsion force on the rotor. This motor was patented as US patent # 3,890,548.
A hundred horsepower Edwin Grey motor was installed in a test car. This car had a range of 700 miles from the charge in just two 12 volt car batteries! This test made the newspapers and Edwin Grey received a certificate of merit from then governor of California, Ronald Reagan.
Another aspect of Edwin Grey’s motor was that he was using a form of electricity that was similar to radiant energy discovered by Tesla which Grey called “Cold Electricity”. The Cold Electricity device was patented as US patent # 4,595,975. These aspects of Grey’s cold electricity are discussed in Peter Lindemann’s book The Free Energy Secrets of Cold Electricity. Peter Lindemann has a free energy website here: http://www.free-energy.ws or https://web.archive.org/web/20201022053921/http://free-energy.ws
The Evgrey Motor Company was created and people were buying up stock. A site for a factory to mass produce these cars was being determined. Then suddenly, a lawsuit from the Securities and Exchange Commission was leveled against the Evgrey Motor Company. This lawsuit effectively shut down the company.
Let’s see here now. The Rockefellers have both considerable ownership of oil companies and influence on the Securities and Exchange Commission. You don’t suppose that they may have been worried that cars manufactured using Edwin Grey’s concepts may eventually diminish their cash flow do you?
Edwin Grey’s concept of pulsing opposed electromagnets was followed up by experimenter Doug Konzen. He was getting interesting results at much lower voltages, typically 12 volts from a car battery which he was open sourcing on the internet. I corresponded with him in the early days of his experiments via email, trying to convince him to use higher voltages like Edwin Grey had used. But, he kept using low voltages. The thing is that, even using low voltage, he was getting over unity (more power out than in) with a closed loop motor generator combination. Some of Doug Konzen’s information can be found here: https://blog.go-here.nl/6582
Another type of motor Konzen experimented with is the Rotoverter. The Rotoverter concept was developed by Hector D. Perez Torres who also gave it to the world by open sourcing it. Basically one modifies a three phase, AC electric motor. What is done is to place capacitors in parallel with the motor coils so that they form tuned circuits that resonate at 60 Hz, greatly increasing the efficiency of the motor.
AC electrical generators can also have their efficiency increased in this way. When the motor is connected to a generator that both have been thusly modified, it is possible to get more power out than is put in. See: http://www.rexresearch.com/rotoverter/rotoverter.htm and https://www.youtube.com/watch?v=7-6unOMgYmo
Another free energy researcher is John Bedini who developed a free energy machine in the early 1900s. This machine attained 800% efficiency during initial tests. His machine was demonstrated at the 1984 Tesla Centennial Symposium in Colorado Springs, Colorado. Instead of patenting his machine, he also open sourced it. Bedini got his idea for the device from Ronald Brandt, a personal friend of Nikola Tesla.
Bedini also worked in conjunction with Thomas Bearden on some of his many other projects, with Bearden developing the theory and Bedini developing the electronics and hardware. Thomas Bearden himself, patented a free energy machine which he called a Motionless Electrical Generator (MEG) from a design given him by another free energy researcher, Timothy Trapp of World Improvement Through The Spirit Ministries (WITTS).
For more information here are their websites:
John Bedini: http://johnbedini.net
Thomas Bearden: http://cheniere.org
Timothy Trapp: http://www.witts.ws/
Excerpt from The Science And Technology Of Free Energy
See Part II here.